POWER-Z USB PD Tester USB Voltmeter QC3.0 2.0 Charger Voltage Current Ripple Dual Type-C KM001 Volt Meter Power Bank Detector

POWER-Z USB PD Tester USB Voltmeter QC3.0 2.0 Charger Voltage Current Ripple Dual Type-C KM001 Volt Meter Power Bank Detector

POWER-Z USB PD Tester

Function:

1.Display voltage, current, power, mAh, mWh

2.Press the menu button can be transferred to the recording interface, you can set to store a variety of different capacity and energy data

3.Each stored data can be deleted and marked

4.Set the recording time interval and maximum capacity

5.Automatic run of the rule setting, current threshold setting

6.End time setting

7.Display the information interface

8.Test line resistance function

It will be measured wire into the tester, followed by a load, the resistance will always beating, until the resistance is stable, the degree, is the size of the line resistance, and there are GOOD evaluation, let you know the wire is good Bad

You can set the waveform display refresh rate, the higher the refresh rate, the faster the display

Plug in the charger, the automatic display D + and D-voltage, the following shows the charger support the charging protocol

Press the menu button, automatically trigger quick charge voltage!